Bilal

Bilal
Threads Started: 0
Posts: 12
Strapline: Registered User
Location:
Occupation:

Posts

re how much time take a material to come kiln inlet from top of the preheater cyclone

Dear Vevik  Generally modern preheaters are designed to give retension time of about 25-30 seconds in preheater...

re Probleme with buner

Dear N Jaye, This is a common problem with number of plants, but any way there are a few more types of castable...

re flap damper

Dear, Removing flap damper allows hot gases to short circuit through feed chuts reduces cyclone efficiency, adv...

re Kiln Inlet Coating

Dear Kumar, I agree with Mr Ted to  mention tharoughly the reasons of kiln inlet build ups as raw mix missprapo...

re Kiln Inlet Coating

Dear Kumar, I agree with Mr Ted to  mention tharoughly the reasons of kiln inlet build ups as raw mix missprapo...

re Ring formation inside the Kiln

Dear BK It is a common problem of various plants with number of contributing factors. To find out the best solu...

re calciner temp

Cross-check temp. with portable thermocouple, then provide the temperatures to see the problem.

Re: Problem with cooling fan of IKN grate cooler

Dear vuha,  Snowman formation is the basic reason for your problem, after maintanance (clean all grate plates for b...

Re: Clinker High Liter Weight and High Free Lime

dear mb14. your chemistry looks good, and can be better if it is possible to decrease SiO2 and increase CaO, I will...

Re: Clinker High Liter Weight and High Free Lime

dear mb14 I am sure that you would have tried with kiln coal, kiln rpm and kiln feed lsf upto your best. I would li...