M.Azhar

Posts

Normal coating area in kiln

Hello every body     what is normal coating section length in kiln and what should be the optimum thickness of coa...

Re: Snowman On the kiln burner

Hello ILA   before my kiln burner position was the 700mm from the nose ring i faced rhino horn now position is 400...

Re: Finnes Of meal

Hello every one  My second question is this ,, Is there any effect on cyclones(C1A, C1B) efficiency  due to the hi...

Re: Snowman On the kiln burner

Hello every one It is possible to install air cannon on burner head , some KHD burner have this facility  

Finnes Of meal

What is optimum finees range for the kiln feed material , if the finess is less than 10% at 90micron what would be ef...

Re: PH Outlet Gas Flow

Hello Michael    pls write us an example of calculation about the composition of exit gas

Re: Snowman On the kiln burner

Hello Michael  I dont get the function of aerodynamic in the formation of Rhino-horn pls send some text about thi...

Re: Urgent

Dear I will suggest you IKN coller , Reasons are   1. Less mechanical maintenance 2. High heat recovery, (high se...

Re: Alkali and Jamming

Im trying  say that blocking in the smoke chamber is due to the saturation of Chlorides and the Na-Sulfate, ones the ...

Re: Alkali and Jamming

Hello Mr Gulam Dastgir   Choking in the smok chamber is due to the  Na and K  chlorides and  high temperature but ...