Biju
6 posts
TimePosted 25/06/2007 06:52:36
Biju says

Inert Gas plant

How do determine the capacity of Inert gas(Nitrogen) plant for a coal mill circuit. Is it based on the fine coal  hopper and baghouse volumes? Can any body share how to calculate this requirement? Thanking you : Biju

Reply


Know the answer to this question? Join the community and register for a free guest account to post a reply.

Michael Clark
312 posts
TimePosted 30/07/2007 14:37:30

Re: Inert Gas plant

Yes, you need the volume of the bin and the baghouse. The system should flood the free space above the ffine coal in the bin. There must be facility to top up with nitrogen as the bin levels rises and falls.

Reply

AtillaZ
3 posts
TimePosted 10/08/2009 15:22:57
AtillaZ says

Re: Inert Gas plant

There shoud also be reserve capacity. It is calculated as follows :

1. The maximum gas volume has to be stored min. 2-fold additional minimum reserve capacity.

2. The maximum gas volume has to be discharged out of the tanks’ gas phase within 60 minutes.

 

Reply