32 posts
Re: Preheater fan coating farmation
Deal all
Ple to get your reply , that what is particle streamlines. As envisaged in above alticle by you i gone thru the Robinson take-on to coping the problem . He significantly gathered the problemestic information that was the root problem, but he has concened over to redisign the fan resonance with new expansion. Additionally hhe proposed to match the shape size of fan blade close to material streamlines to reduce the build-up problem.
Now what makes me to stem to understand is ;
What is
1) Matreial stream lines
2) Build-up problem
3) How this can patronage to overcome with the problem.
Looking for someone comments
cheers
rahul
Know the answer to this question? Join the community and register for a free guest account to post a reply.
1 posts
Re: Preheater fan coating farmation
Hello
You dont pointed. Do you have a by-pass system. If no you should install it. Or enothe way to instal differential small chamber decrease temperature and preasure befor id fan. Enother way to check and move inlet of by-pass system.
If you already have manage it. please let me know how?
Best regards
1 posts
Re: Preheater fan coating farmation
Mihail
You are right. Bypass system between preheater and kiln will help in reducing the level of alkalies in preheater gases which in turn will reduce the recycling of free alkalies in preheater and coating of the same in Preheater fan and avoid Preheater cyclones jamming.
Best regards,
Sachin
198 posts