18 posts
324 posts
TimePosted
21/12/2009 12:34:48
Michael Clark
says
Re: Kiln Speed
With a slope of 4% the angular degree of the slope is 2.29 degrees. The calculation is ATAN(0.04)*180/PI().
3 posts
1 posts
TimePosted
27/02/2016 07:20:48
KILN Tyre migration
says
re Re: Kiln Speed
Dear,
If your kiln slope is 4% then you can calculate the its angle by trigonometric ration
as slope=tan @
@= inverse tan(0.04)
=2.29degree