Engr
19 posts
TimePosted 18/05/2011 23:26:10
Engr says

Run plant without cyclone dip tubes.

Dear all,

Can we operate plant on full capacity without having DIP tube in bottom cyclone.

What are expected effect on Production, PH fan load, Cyclone exit and cone T & P and other operational changes if you know in such condition.

Thanks.

EngrS

Reply


Know the answer to this question? Join the community and register for a free guest account to post a reply.

M.Azhar
70 posts
TimePosted 20/05/2011 21:51:44
M.Azhar says

Re: Run plant without cyclone dip tubes.

hello every one...

 yes you can but  with some extra Kcal...

 and may some P  fluctuation  

 

Reply

Nael
72 posts
TimePosted 22/05/2011 09:05:23
Nael says

Re: Run plant without cyclone dip tubes.

Hey; 

We are running 5000 tpd kiln with the maximum capacity without bottom cyclone dip tube (due to shortage of spare parts). Running the kiln without a dip tube may only decrease the settling efficiency of bottom cyclone which can result in:

1) A higher temperature at top of the preheater

2) A higher heat consumption.

3) A little rise in negative pressure at top.

Best Regards

Nael

Reply

fluence sysbacip
46 posts
TimePosted 22/05/2011 13:37:05

Re: Run plant without cyclone dip tubes.

we are running a plant with double string top twin cyclones,

cyclone 5 is with out dip tube and still we are getting full production or even more.

Regards,

Sheikh

Reply