cement kiln
4 posts
TimePosted 29/07/2016 19:43:39

development of Magnetic field on kiln shell while replacement

Dear Sir,

In our recent kiln shutdown we hav planned to replace  part of shell ..When shell was cut and put new shell it was observed that there is magnetic field near new shell & old shell up to distance of 200 mm on both sides of joints .

could you tell me the reason of magnetic field developed and which is  not allowing welding with rectifier .so, we put AC welding with . normal electrodes and could  get succeed .

pl let me know the reason of such a high magnetic field up +20 to -20 gauss.

 

SC Sharma

DCM Shriram 

Reply


Know the answer to this question? Join the community and register for a free guest account to post a reply.

BPK
4 posts
TimePosted 04/09/2016 15:34:30
BPK says

re development of Magnetic field on kiln shell while replacement

Hi

If your kiln is installed in north-south direction there is chance of kiln shell getting polarized on long run. Any iron piece kept in north-south direction for long time will get polarized and may develop magnetic properties.

Reply