admin
Posts: 1156
Strapline: Registered User
Location:
Occupation:
Posts
Burning Question 25
Ours is ILC 5-stage pre-heater kiln with 3300tpd production capacity. Recently we have changed the kiln fuel from fue...
Re: Burning
The composition of the coal has affected the melt content of your clinker. This is affecting the kiln torque because ...
Burning Question 26
We have a plant of short kiln with two stations 52m length and 4.8m dia since some months we are facing problem of re...
Re: Burning
These temperatures are serious and will damage the kiln. You need to change the kiln chemistry to adjust the flux con...
Burning Question 27
We need to know the distribution temperature on preheater kiln - in-line calciner - double string - four-stages cyclo...
Re: Burning
The shell temperature profile varies with the kiln process (precalciner, preheater, long dry, wet etc.), type of refr...
Burning Question 28
We are facing severe problem of balling ball size is sometimes around 2m dia which chokes the hammer crusher and we a...
Re: Burning
We hear of these problems with increasing regularity. At one factory the problem was associated with an increase in t...
Burning Question 29
We are a cement plant, operating with 100 per cent petroleum coke with 6 per cent sulphur. If the amount of SO 2 in ...
Re: Burning
I see no environmental or pollution related disadvantages in using petroleum coke to fire your kilns.