Biju
6 posts
TimePosted 16/03/2007 09:49:39
Biju says

Liquid calculation formulae @ 1450 deg C temperature

What is the  formulae used for Liquid calculation at 1450 deg C? is it

1.13 C3A+1.35C4AF+MgO+ Na2O +K2O 

or

 1.13 C3A+1.35C4AF+MgO+Na2O +K2O + SO3

Some places SO3 is shown while in some it is not. Which is the correct one?

 

 

 

Reply


Know the answer to this question? Join the community and register for a free guest account to post a reply.

Michael Clark
324 posts
TimePosted 26/04/2007 10:10:53

Re: Liquid calculation formulae @ 1450 deg C temperature

Both are only approximations and do not take into account factors such as solid solution. Whether it is correct to include SO3 or not depends on the alkali:sulphate ratio.

Reply

shiggavi
11 posts
TimePosted 04/05/2007 10:20:37
shiggavi says

Re: Liquid calculation formulae @ 1450 deg C temperature

u can try this formula but it only theoritical.

 

3 X Al2O3 + 2.25 X Fe2O3 + MgO +K2O + Na2O + SO3

Reply

RAJIV MODGAL
2 posts
TimePosted 16/12/2010 11:37:28

Re: Liquid calculation formulae @ 1450 deg C temperature

Michael Clark:

Both are only approximations and do not take into account factors such as solid solution. Whether it is correct to include SO3 or not depends on the alkali:sulphate ratio.

Dear Mr clark, Sub:-High dust recirculation and high free lime We request your help in solving our above subjected problem. At sanghi cement we are having 9500Mt/Day kiln where axial air is being maintained11500 and radial zero(0). The dust recirculation is so high that burning zone temperature could not be assessed (it is showing in the range 900 to 1050 degree centigrade).We are using high VM Indonation coal, our raw mix is having 1.1 to 1.2% SO3 and nearly 2.3%MgO, maintaining residue on 212mic is nearly 3%. Our clinker analysis is as under:- Loi 0.28% SiO2 20.54% Al2O3 5.53% Fe2O3 4.14% CaO 63.79% MgO 3.82% SO3 1.08% Cl- 0.028% LSF 96.61 SM 2.13 AM 1.33 F.CaO 2.8% Liq. 29.93 Please inform, what possible stapes we could take in arresting above subjected problems. Warm Regards, Rajiv Modgal G.M(Q.C) Sanghi industries limited

Reply