6 posts
3 posts
16 posts
TimePosted
12/11/2011 16:30:04
Ex-FlSmidth-Designer
says
Re: what is minimum kiln feed
Mr.SHAH:
Hello every one
what could be the minimum kiln feed with the safe refractory life.
With respect to Safe refractory life there could be two perceptions
1. Thermal loading of burning zone, Gcal/hr.m2
2. burning zone degree filling, % and Volumetric loading tpd/m3
Thermal loading and burning zone filling degree, depends on kiln geometry and slope. generally for design considerations thermal loading is limited to 5.5 Gcal/hr.m2 and Burning zone Degree filling to 15% and Volumetric loading to 5.0 - 5.5 tpd/m3. these values depends on the burnability of material. Above said values can easily violated if burnability index reads "Very Easy"
Page
1
of
1
1