Ahmed

Ahmed
Threads Started: 8
Posts: 31
Strapline: Registered User
Location:
Occupation:

Posts

re Cooler ESP high dust emission

Try to control with hood draft towards positive, and observe the dust emission leves, but it definitely effects...

re Cooler ESP high dust emission

Hello My friend, 1 ) What is the cooler vent temp. entering to heat exchanger ? 2) From where tapping is tak...

re CALCULATION OF BALL MILL GRINDING EFFICIENCY

Please can anyone give me, step step by procedure on how to work out on cement ball mills to improve it's effic...

Fan shaft power calculation

Hello everyone, plz tell me how to calculate fan shaft power at different rpm's, by knowing impeller weight and...

re FAN EFFICIENCY FORMULA DERIVATION

Dear XXXX, The pressure conversion formulas Millimeter of water to pascal (mmH2O to Pa): 9.8...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Thank u for ur answer sir, here v r using HFO 380 cst as a fuel

re FAN EFFICIENCY FORMULA DERIVATION

Dear XXXX, Simply, Fan Process Power = Flow in M3/s*Fan total pressure in pa and Shaft power is given by sup...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello Sir, Yes our Rawmeal chloride has increases from 0.22 to 0.28 %, but we r maintaining this with 45 % bypa...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

In kiln feed it is increased from 0.22 to 0.28 %, keeping other alkalis K2O and Na2O, same 0.4 and 0.35 respective...

re Impact of ALKALY, SULPHURE and CHLORINE in Kiln operation and clinker quality ?

Hello , If my alkalis and sulphur kept constant and sudden increase of chloride from 0.22 to 0.28 what is it...