Ted Krapkat
Posts: 537
Strapline: Registered User
Location: Gladstone, Queensland, Australia.
Occupation: Plant Chemist, Cement Australia.
Posts
re Sticky Material
Hello Arielarg, Minerals containing Al2O3 have a very high melting temperature (eg refractories), so it's not c...
re High ash coal
Hi Filippo, With low volatile matter/high ash coals you have to consider the following;- (a) KILN RINGS: H...
re Oppsite classification of grinding media
Hello David, You can get reverse classification if your ball loading volume is too high, especially with low fr...
re Clinker Strength
Hello Dipendra, What concentration of fluoride did you try? You should aim to have the clinker fluoride level a...
re Re: Raw meal to clinker ratio
Hello Ravi, There are two ways to do this;- 1. Using simultaneous equations. or 2. Using the Solver fu...
re % OF POZZOLONA IN PPC
Hello Tendulkar, One method is by testing the insoluble residue of OPC, PPC and pozzolan and calculating the % ...
re Corelation between burner and clinker quality/strength or raw mix design
Hello Trendulkar, The hydraulic reactivity of a clinker mineral is the rate at which it reacts with water to fo...
re Clinker litre weight
Hello BLM, The only other thing I can suggest is to reduce the liquid phase of the clinker, which will make the...
re Clinker litre weight
Hello BLM, Yes, high litre weight clinker would certainly tend to be harder to grind since the clinker is more ...
re Corelation between burner and clinker quality/strength or raw mix design
Hello Ramesh, Firstly, what's your clinker chemistry. In particular free lime, C3S, C2S, C3A and alkali sulphat...