13 posts
TimePosted 23/07/2016 07:50:14
Nasir says

Heavy coating at start of burning zone

How can heavy coating( 500~700 mm Thick) can be removed from kiln during operation. Inserting in burner pipe or changing the shape of flame, or changing primary air fan RPM has no effect.  Kindly mail at






Know the answer to this question? Join the community and register for a free guest account to post a reply.

11 posts
TimePosted 26/11/2018 11:05:58
VKM1 says

re Heavy coating at start of burning zone

Optimise your liquid % and try to use some silica rich material / Slag to strip off the coating. If brick thickness not sufficient or life nearing end, try Slag option carefully in batches.