Michael Clark
Posts: 324
Strapline: Registered User
Location:
Occupation:
Posts
Re: Replacing ESP with Bag filter
It is becoming common practice to replace ESPs with baghouses for the main kiln exhaust. The dust emissions should ce...
Re: oxy-firing combustion
Oxygen enrichment involcves raising the oxygen content of the combustion air drawn into the kiln by typically 2%. It...
Re: LSF Formula
This is derived from the CSA ternary and the CSAF quaternary phase diagram. It is the line of best fit beyond which ...
Re: oxy-firing combustion
Oxygen enrichment is certainly interesting and has been applied successfully in the USA on a number of cement plants....
Re: 2nd stage showing dead cold on infrared image
The dip tube in stage 3 being out would be expected to mean more hot material passing up to stage 2, so stage 2 might...
Re: alk-sulphate single salts
The alkali sulphates will normally come out with the clinker. Sulphate based build-ups in the kiln inlet are normally...
Re: 2nd stage showing dead cold on infrared image
Are you numbering from the top or bottom of the preheater?
Re: CALCINER
You need the calorific value and ultimate analysis of the coal. Division of the heat required by the net calorific va...
Re: Firing locations
For a low NOx calciner you must fire in two points, below the tertiary air intake to create an oxygen starved "reduci...
Re: Firing locations
There can be multiple firing locations for all these fuels in a calciner It depends on the design of the calciner. ...