prdp.ks
10 posts
TimePosted 31/10/2009 15:37:18
prdp.ks says

Trace Heating for fine coal hopper

Dear All,

Is the trace heating in fine coal duct Hopper before coal dosing system have any significant when ambient temperature ranging 4-45 degree Cent, if yes then what kind of heating element system are prefered i.e

  1. pad heating system
  2. tubiler heating system

and what is the philosphy for heating control, while answer these question please assume moisture content in fine coal as per BS1236.

regards

Prdp.ks

Reply


Know the answer to this question? Join the community and register for a free guest account to post a reply.

Michael Clark
324 posts
TimePosted 04/11/2009 09:02:38

Re: Trace Heating for fine coal hopper

Its would be entirely possible for condensation of water to form with temperatures as low as 4 degree C. That will be well below the dew point in humid conditions.

Reply

fac09
16 posts
TimePosted 07/01/2010 16:58:14
fac09 says

Re: Trace Heating for fine coal hopper

Rather than heat tracing; we installed 4 inches of insulation material on our Fine Coal Bin. Low temperatures inside our fine coal bin building can approach -10 C. We went through detailed calculations to arrive at the insulation thickness. Let me know if you need further help.

 bodero_l@hotmail.com 

Reply