admin
Posts: 1156
Strapline: Registered User
Location:
Occupation:
Posts
Re: Alkali cycles
I think you are operating long wet kilns? If so you could add some chloride to the kiln feed to promote the volatilit...
Alternative resources Question 1
I witnessed a phenomenon at a plant here in Europe, which could not be explained by anybody there. At one plant I fou...
Re: Alternative resources
The rings you describe must be ash rings formed where the ash from the different alternative fuels combine with the c...
Burners Question 1
Our kiln is a 1800tpd coal fired SP kiln with a specific fuel consumption of 850 Kcals/kg clinker. For switching over...
Re: Burners
For switching to natural gas you need to conduct a combustion audit with a specialised company. I would recommend Kil...
Burners Question 2
We are one of the leading manufacturer of gas plant in India. We would like to know the following: How oxygen enrichm...
Re: Burners
Oxygen enrichment of the combustion of a cement kiln is useful because it reduces the volume of the exhaust gases fre...
Burners Question 3
Recently we started production of SRC with 97.5 LSF, 2.35 SM, and 0.75 AM raw meal composition. After that free lime...
Re: Burners
I don't think the high free CaO was associated with the alumina modulus itself. However, the mix of raw materials mus...
Burning Question 1
Our clinker chemical composition is as follows: SiO 2 = 21 per cent; Ca O = 64 per cent; Al 2 O 3 = 6.0 per cent; F...